DataCard SD260L Installation And Administrator's Guide

SD260L/SD360/SD460 Installation and Administrator’s Guide 71
 Hopper1DebowDwellMs—Set the time, in milliseconds, the debow action is applied to a
card. The default is 2000 ms (2 seconds).
 Increase the value to apply the debow action longer.
 Decrease the value to apply the debow action for less time.
Hopper 1 Impresser Settings:
 Hopper1ImpressDepth—Set the depth of the impression on a card. The value is in steps of
the impresser punch.
 Increase the value to deepen the impression.
 Decrease the value to lessen the impression.
 Hopper1ImpressDwellTime—Set the time, in milliseconds, that the impresser remains in
contact with the card. The default is 2000 ms (2 seconds).
 Increase the value to allow the impresser to remain on the card longer.
 Decrease the value to impress the card for a shorter time.
 Hopper1ImpressPositionOffset1—Set the distance from the trailing edge of the card to the
center of the first impression on the card.
 Increase the offset value to increase the distance of the impression from the trailing edge
of the card.
 Decrease the offset value to decrease the distance of the impression from the trailing
edge of the card.
 Hopper1ImpressPositionOffset2—Set the distance from the trailing edge of the card to the
center of the second impression on the card.
 Increase the offset value to increase the distance of the impression from the trailing edge
of the card.
 Decrease the offset value to decrease the distance of the impression from the trailing
edge of the card.
 Hopper1ImpressPositionOffset3—Set the distance from the trailing edge of the card to the
center of the third impression on the card.
 Increase the offset value to increase the distance of the impression from the trailing edge
of the card.
 Decrease the offset value to decrease the distance of the impression from the trailing
edge of the card.
You may need to adjust the card impress depth value based on the card
material and overlay type used.

DataCard SD260L Specifications

General

Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC
Card feeder	Yes
Duplex printing	No
Print technology	Dye-sublimation/Resin Thermal transfer
Maximum resolution	300 x 300 DPI
Print speed (color)	830 card/h
Print speed (monochrome)	200 card/h
Display	LCD
Product color	Blue, Grey
Internal memory	128 MB
Cable lock slot type	Kensington
Total input capacity	100 sheets
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
USB version	2.0
Ethernet interface type	Fast Ethernet
Windows operating systems supported	Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64

Weight and Dimensions

Depth	539 mm
Width	175 mm
Height	224 mm
Weight	5400 g