DataCard SD460 - Use Printer Manager

SD Series Installation and Administrator’s Guide A-13
6.
Startdisplaysonline2.PresstheENTERkeytoprintthetestcard.

Use Printer Manager
UsePrinterManagertoprinttestcardsandfine‐tuneyourlaminationsettings.
Referto“PrinterManager ”onpage31forcompleteinformationaboutusing
PrinterManager.DothefollowingtoprintatestcardfromPrinterManager:
1. LogontoPrinterManager.
A. Dooneofthefollowing:
• OpenanInternetbrowserandentertheprinterIPaddressfromthe
frontpaneloftheprinter,asfollows:https://xxx.xxx.xxx.xxx.For
example,https://172.16.3.34.
or
• OpenthePrinterPropertieswindowforthecardprinterandselectthe
PrinterStatustab.
ClickConfigurePrintertolaunchPrinterManagerinyourdefault
browser.
Ifthebrowserindicatesaproblemwiththewebsitesecurity certificate,
clickContinuetothiswebsite.