DataCard SD460 - Communication

40 Printer Manager
Communication
TheCommunicationsettingschangetheEthernetaddressmethodfromDHCPto
STATIC.IfsettoSTATIC,entertheIPaddress,subnetmask,andgatewayaddress
manuallytomatchthesettingsofthenetwork.
• EthAddressMethod—ThemethodusedtoobtaintheEthernetnetworkIP
address.SelectDHCPorSTATICfromtheCurrentValuedrop‐downlist.
• WhenthevalueisDHCP,theEthGatewayAddress,EthIpAddress,and
EthSubnetMaskvaluesarecontrolledbytheDNSserverandthesettings
arefilledinautomatically.(TheEthDnsAddress1,EthDnsAddress2,and
EthDnsSearchSuffixvaluesprovideDNSserverinformation.)
• WhenthevalueisSTATIC,theEthGatewayAddress,EthIPAddress,and
EthSubnetMaskvaluesmustbesetmanually.
• EthGatewayAddress—EnterthegatewayaddressfortheEthernet
network.
• EthIpAddress—EnterthestaticIPaddressfortheprinter.
• EthSubnetMask—EnterthesubnetmaskfortheEthernetnetwork.
• EthDnsAddress1,EthDnsAddress2,EthDnsSearchSuffix—Thesesettings
provideDNSserverinfo rmation.
1. ClickSetCurrenttoapplythechanges.
2. LogoutofPrinterManager,andthenrestartitforthechangestotakeeffect.
Description Default Value Current Value (unit)
1) EthAddressMethod DHCP DHCP
2) EthDnsAddress1 0.0.0.0 0.0.0.0
3) EthDnsAddress2 0.0.0.0 0.0.0.0
4) EthDnsSearchSuffix
5) EthGatewayAddress 0.0.0.0 0.0.0.0
6) EthIpAddress 0.0.0.0 0.0.0.0
7) EthSubnetMask 0.0.0.0 0.0.0.0