DataCard SD460 - Page 52

44 Printer Manager
UpdateCurrentValuesasneeded,andthenclickSetCurrenttoapplychanges.
• ActivityLogExternal—Enableordisablewritingtheactivitylogtoanexternal
server.
• ActivityLogInternal—Enableordisabletheinternalactivitylog.
• CPX—EnableordisabletheCP Xcommunicationsprotocolusedbysome
Datacardsystems.
• DPCL—EnableordisableDPCLcommandaccesstotheprinterthroughthe
non‐secureport.DCPLmustremainenabledwhenyouusetheXPSCard
PrinterDriver.
• DPCL2—EnableordisableDPCL2commandaccesstotheprinterthroughthe
non‐secureport.
• DPCL2Secure—EnableordisableDPCL2commandaccesstotheprinter
throughthesecureport.
• DPCLSecure—EnableordisableDPCLcommandaccesstotheprinterthrough
thesecureport.
• NetworkAccessControl—Enableordisablenetworkaccesscontrol.
• Plugin—Enableordisablethepluginfeaturefortheprintertoaccessan
installed plug‐in.ThissettingisusedforOpenCard‐enabledprinters .
• RejectHopper—Enableordisableuseoftherejecthopper,ifoneisavailable,
forrejectedcards.IfthisvalueissettoDisabled,thecardsareplacedinthe
fronthopper.
• Remake—Enableordisablecardremakes.IfRemakeissettoEnabledanda
printrequestfails,theprintrequestistriedagainwithanewcard.Acardis
retriedonlyonce.
• RemakeMethod—Selectthecardremakemethod.Thissettingdoesnot
displayifRemakeissettoDisabled.
• SelectConserveSuppliestoreprintthe cardoutofqueueorder.
• SelectPreserveOrdertoreprintthecardinqueueorder.
• RetrieveDataT imeout—Specifythetimeperiodduringwhichcarddatacanbe
retrieved.Youcanspecifyfrom0to120seconds.IftheCurrentValueis0,
dataisnotretrieved.
• RibbonInitialize—Enableordisableinitialization oftheribbonwhenthe
printerispoweredon.