DataCard SD460 Installation And Administration Guide

SD Series Installation and Administrator’s Guide 53
Changesettingsasneeded,andthenclickSetCurrenttoapplychanges.
• Attempts—Specifythenumberofattempts(automaticretries)theprinter
makestoencodethemagneticstripedata.Thisvaluealsoisusedforthe
numberoftimestoattempttoreadmagneticstripedata.
Ifyousetthisnumbertoalowervalue,itincreases thethroughputofthe
printerbutcandecreasethereliabilityofmagneticstripeencoding.
Ifyousetthenumbertoahighervalue,itdecreasesthethroughputofthe
printerbutcanincreasethereliabilityofmagneticstripeencoding.
Avalueof1meansnoretryattempts.
• Coercivity—Selectthecoercivitysettingthatmatchesthecardsyouareusing.
Coercivitymeasurestheresistanceofmagneticmaterialtotheremovalof
encodeddata.Highcoercivity(HICO)requiresmoreelectricalforcetoencode
dataandthedataismoreresistanttomagneticinterference.Thechoicesare
HICO,LOCO,NTT1,NTT2,NTT3.
• DataFormat(1,2,3)—Specifythenamesoftheda taformatsusedfortracks
1,2,and3.
Forsingle‐trackmagneticstripeencoding,setDataFormat1toJISand
DataFormat2andDataFormat3toNONE.
Touseacustomdataformat,definetheformatsfortracks1,2,and/or3using
theMagStripeCustomTrack(1,2,3)settingsandthensetthecorresponding
DataFormatsettingstoCUSTOM.
• NoDataDisableTrack—Disablethemagneticstripewriteheadforatrackifthe
trackcontainsnodata.Whenthisisdisabled,anytrackthatwasnotgiven
dataiserased.
• ReadT r ack(1,2,3)—Allowmagneticstripereadactionstoreadfromtracks1,
2,and3.
• SSA(1,2,3)—Setthestartsentineladjustmentfortracks1,2,and3.(SSA3
alsosetsthestartsentinelforasingletrack.)Thestartsentinelisencodedon
themagneticstripeimmediatelybeforethefirstdatacharacterandindicates
thebeginningofdata.Enteravaluefrom-4to4.
• StripeEncoderMultiplier—Thisvalueisinformationonlyandcannotbe
changed.ItisdeterminedwhenanSSAte stisrun.
• WriteTrack(1,2,3)—Allowmagneticstripewriteactionstowritetotracks1,
2,and3.

DataCard SD460 Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC, Smart card
Print technology	Dye-sublimation/Resin Thermal transfer
Duplex print speed (color)	200 card/h
Display	LCD
Certification	cULus, FCC, I.C., CE, Ctick, VCCI, RoHS, WEEE, CCC, KCC
Product color	Black, Blue
Internal memory	128 MB
Built-in barcodes	1D, 2D
Total input capacity	100 sheets
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Wi-Fi	No
USB version	2.0
Ethernet interface type	Fast Ethernet
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	13600 g
Dimensions (WxDxH)	589 x 270 x 513 mm