Elrepho 3000
Data Maintenance Mode
Procedure View Mode
This mode is used to view and print the setup of an existing
procedure. Procedures that are not currently in use by any jobs can
also be edited or deleted from this mode.
To view an existing procedure, follow steps 1 and 2 on the previous
page, then use the arrow keys to move through the list of existing
procedures, then press SEL to enter the Procedure View Mode.
The current setup for the procedure will be displayed along with the
procedure name and all tasks listed in the order in which they will
be displayed.
PRINT DEL EDIT SCROLL
PRINT Prints procedure setup data and task setup data
for all tasks used by the procedure
DEL Deletes the procedure (press twice to delete)
EDIT Enters Procedure Setup Mode. Refer to the next
section.
SCROLL Displays the next screen of data
26 Datacolor International
To Next Page
Loading...
Need help?
General
