Datacolor Elrepho 3000 User Manual

Elrepho 3000
• Illuminant/Observer
• UV Filter Setting
If the selected formula type requires specific settings or conditions,
only the data which can be modified will be able to be edited.
Use the EDIT key to change the Viewing Area and UV Filter
Setting.
Use the SEL key to edit any of the other fields. You will enter the
corresponding mode to perform the edit.
Press the SAVE key to keep the task setup information.
Formula Selection Mode
Use this mode to select the formula to use with the task you are
currently editing.
There are three types of formulas; Colorimetric, Index and Paper
Task Formulas.
Some formula types require specific settings. If this is the case, the
setup for the task being edited will inherit the appropriate settings
when the formula is selected.
Use the arrow keys to move up and down the list of formulas to
select.
Press the PAGE key and then the ↑ or ↓ key to display the next or
previous screen of data.
Use the SEL key to select a highlighted formula, which will then
become part of the task.
Data Maintenance Mode
Illuminant Selection Mode
Use this mode to select a new Illuminant/Observer combination to
use with the task you are editing.
Use the arrow keys to move up and down the list of conditions.
Press the PAGE key to advance beyond one screen of data.
Use the SEL key to select a highlighted Illuminant/Observer
combination which will be used by the task being edited.
24 Datacolor International

Datacolor Elrepho 3000 Specifications

General

Brand	Datacolor
Model	Elrepho 3000
Category	Measuring Instruments
Language	English