Elrepho 3000
Press SEL in the Setup Mode “Langue/Sprache” option to access
this option.
Use the arrow keys to move up and down the list of languages
supported by your instrument.
Use the SEL key to select a highlighted language.
OTE: Press the MENU key to exit without changing the
changing the language selection and return to the Setup Mode.
Setup Mode.
System Reset
This mode is used to reset the data stored in the instrument.
There are 2 types of data: Setup data and User data.
Setup Data includes such things as serial communications
parameters, LCD backlight sleep time, and default setup
information for jobs.
User Data includes task, procedures, jobs, standards, diagnostic tile
data, and white calibration standards.
Pressing SETUP initializes only the Setup data.
Pressing DATA initializes only the User data.
Pressing BOTH initializes the Setup data and the User data.
Press the MENU key to exit without making any changes.
PLEASE USE CAUTION WITH THIS OPTION !
System Setup
This mode provides options to configure the following settings:
• Keyboard/printer settings
• Enable/Disable Illuminants to display
Datacolor International
37
To Next Page
Loading...
