Datacolor Elrepho 3000 User Manual

Elrepho 3000
Datacolor International
11
The tion of these keys are as follows: func
of a name.
DIT rrently highlighted to the
ngs for all fields edited on the current
eys on the external keyboard function
when editing name fields:
Æ Use to move through the characters
↓ Use to move down to the next field.
Use to change the character cuE
next character in the alphabet.
SAVE Use to keep setti
screen.
n addition, the following kI
nstrument Setup I
After you have used and tested the DEMO PROCEDURE and
measurement tasks supplied with your system (discussed in the
Quick Start section), the Elrepho 3000 should be set up to me
equirements of your facility.
et the
ode
p)
nt
r
Listed below are the requirements to set up your instrume nt:
1. Define the Measurement Tasks to be used (see Data
Maintenance Mode - Task Maintenance)
2. Define the Procedures to be used (see Data Maintenance M
- Procedure Maintenance)
ilter3. Establish the Calibration Setup to use and set the UV f
calibrator position (See Setup Mode - Calibration Setu
4. Calibrate the instrument (see Calibration - Instrume
Calibration )
Home Moves to the first character in a “name” field.
End Moves to the last character in a “name” field.
Up Arrow Highlights the previous option or item.
Down Arrow Highlights the next option or item.
Left Arrow Moves one character to the left in a “name” field.
Right Arrow Moves one character to the right in a “name” field.

Datacolor Elrepho 3000 Specifications

General

Brand	Datacolor
Model	Elrepho 3000
Category	Measuring Instruments
Language	English