Elrepho 3000
Features
The Elrepho 3000 supports the following features:
• d/0° Reflectance Geometry
• Specular Excluded Only (gloss component excluded)
• XLAV, SAV, and USAV viewing areas
• UV Included/Excluded
• UV Cut-off Filters at 420nm and 460nm
• A single UV calibrator position; UVCAL
• Illuminants: A, C, CWF, D50, D65, D75, TL84, U3000
• Observers: 2°, 10°
• Onboard Instrument Diagnostics
• Sample Averaging
• Data input via external keyboard(optional on Model 3100)
• Data output via external printer (optional on Model 3100)
• Support Calibration with either the white tile or 3rd party
white reference standards
• User settable re-calibration time interval
• Password protection of setup data
Introduction
2 Datacolor International
To Next Page
