Elrepho 3000
A single measurement is required to compute Helmholtz
Coordinates.
Print Contrast (3100 and 3300 models)
A measure of how well a coating binds to a substrate.
Measurements of a printed and unprinted sample will be taken.
Print contrast is the difference between the Y value for each
sample, divided by the Y value for the unprinted sample.
Default Illuminants
This list contains the recommended illuminants which will be
retrieved and used as the default each time a new formula type is
selected.
To maintain industry compatibility, these defaults are the same as
those used with the Elrepho 2000.
FORMULA TYPE DEFAULT
Tristimulus X,Y,Z,x,y
D65/10°
Reflectance Data Selectable
Datacolor International
51
To Next Page
Loading...
