Datakom D-500 - Topologies; Selecting the Topology

D-500 User Manual Rev_06 Firmware V-5.8
K35D05-EN - 34 -
Various topologies are selectable through program parameter.
The topology is independently selectable for both genset and mains sections.
In following drawings the connections are shown for the alternator. Current transformers are supposed
connected to the alternator side.
Similar topologies re available for the mains side as well.
4.1. SELECTING THE TOPOLOGY
4. TOPOLOGIES
Generator
Parameters
s
Topology
Selection
Topology
Selection
Mains
Parameters
s