Datakom D-500 - Table of Contents

D-500 User Manual Rev_06 Firmware V-5.8
K35D05-EN - 6 -
1. INSTALLATION INSTRUCTIONS
2. MOUNTING
2.1 DIMENSIONS
2.2 SEALING, GASKET
2.3 ELECTRICAL INSTALLATION
3. TERMINAL DESCRIPTIONS
3.1. BATTERY VOLTAGE INPUT
3.2. AC VOLTAGE INPUTS
3.3. AC CURRENT INPUTS
3.4. DIGITAL INPUTS
3.5. ANALOG SENDER INPUTS AND SENDER GROUND
3.6. CHARGE INPUT TERMINAL
3.7. MAGNETIC PICKUP INPUT
3.8. MAINS CONTACTOR OUTPUT
3.9. GENERATOR CONTACTOR OUTPUT
3.10. DIGITAL OUTPUTS
3.11. INPUT/OUTPUT EXTENSION
3.12. RS-485 PORT
3.13. J1939-CANBUS PORT
3.14. ETHERNET PORT
3.15. USB DEVICE PORT
3.16. USB HOST PORT (OPTIONAL)
3.17. RS-232 PORT (OPTIONAL)
3.18. MICRO-SD MEMORY CARD SLOT (OPTIONAL)
3.19. GSM MODEM (OPTIONAL)
4. TOPOLOGIES
4.1. SELECTING THE TOPOLOGY
4.2. 3 PHASE, 4 WIRE, STAR
4.3. 3 PHASE, 3 WIRE, DELTA
4.4. 3 PHASE, 4 WIRE, DELTA
4.5. 3 PHASE, 3 WIRE, DELTA, 2 CT (L1-L2)
4.6. 3 PHASE, 3 WIRE, DELTA, 2 CT (L1-L3)
4.7. 2 PHASE, 3 WIRE, DELTA, 2 CTs (L1-L2)
4.8. 2 PHASE, 3 WIRE, DELTA, 2 CTs (L1-L3)
4.9. 1 PHASE, 2 WIRE
TABLE OF CONTENTS