D-700 MK3 User Manual Firmware V-16.8
- 139 -
The parameters below define the functions of relay outputs. The unit has 6 relay outputs. All relays have
programmable functions, selected from a list.
Relays may be extended up to 40 using Relay Expansion Modules.. Other relays are in the optional
Expansion Modules.
Factory set as Crank Relay output
Factory set as Fuel Relay output
Factory set as Horn Relay output
Factory set as Preheat Relay output
Factory set as Stop Relay output
Factory set as Idle Speed Relay output
Relay expansion module – 1
Relay expansion module – 1
Relay expansion module – 1
Relay expansion module – 1
Relay expansion module – 1
Relay expansion module – 1
Relay expansion module – 1
Relay expansion module – 1
Relay expansion module – 2
Relay expansion module – 2
Relay expansion module – 2
Relay expansion module - 2
Relay expansion module - 2
Relay expansion module - 2
Relay expansion module - 2
Relay expansion module - 2
Relay expansion module - 3
Relay expansion module - 3
Relay expansion module - 3
Relay expansion module - 3
Relay expansion module - 3
Relay expansion module - 3
Relay expansion module - 3
Relay expansion module - 3
Relay expansion module - 4
Relay expansion module - 4
Relay expansion module - 4
Relay expansion module - 4
Relay expansion module - 4
Relay expansion module - 4
Relay expansion module - 4
Relay expansion module - 4
Below is a short list for reference purposes. Please use
the RainbowPlus program for complete selection list.
17.9. OUTPUT CONFIGURATION
To Next Page
Loading...
