Datakom D-700 MK3 - Table of Contents

D-700 MK3 User Manual Firmware V-16.8
- 6 -
1. INSTALLATION INSTRUCTIONS
2. MOUNTING
2.1 DIMENSIONS
2.2 SEALING, GASKET
2.3 ELECTRICAL INSTALLATION
3. TERMINAL DESCRIPTIONS
3.1. BATTERY VOLTAGE INPUT
3.2. AC VOLTAGE INPUTS
3.3. AC CURRENT INPUTS
3.4. DIGITAL INPUTS
3.5. ANALOG SENDER INPUTS AND SENDER GROUND
3.6. CHARGE INPUT TERMINAL
3.7. MAGNETIC PICKUP INPUT
3.8. DIGITAL OUTPUTS
3.9. -
3.10. -
3.11. INPUT/OUTPUT EXPANSION
3.12. J1939-CANBUS PORT
3.13. USB DEVICE PORT
4. PLUG-IN MODULES
4.1. MODEM PLUG-IN MODULE
4.1.1. GSM MODEM MODULE
4.1.2. Wi-Fi MODULE
4.1.3. ETHERNET MODULE
4.1.4. RS-485 MODULE
4.1.5. RS-232 MODULE
4.2. SYNCHRONIZATION PLUG-IN MODULE
4.2.1. ANALOG AVR CONTROL OUTPUT
4.2.2. ANALOG GOVERNOR CONTROL OUTPUT
4.2.3. DATALINK-CANBUS PORT
4.2.4. ANALOG LOAD SHARE SIGNAL
4.3. ANALOG PLUG-IN MODULE
4.3.1. ANALOG I/O EXPANSION MODULE
4.3.2. DC VOLTAGE & CURRENT MODULE
4.4. 3 X MAINS CT INPUTS MODULE
4.5. COMMUNICATION MODULE
4.5.1. ETHERNET PORT
4.5.2. USB HOST PORT
4.5.3. RS-485 PORT
TABLE OF CONTENTS