Datakom D-700 MK3 - Page 7

D-700 MK3 User Manual Firmware V-16.8
- 7 -
4.6. RS-232 PLUG-IN MODULE
4.6.1. RS-232 MODULE
4.6.2. GSM MODEM MODULE
4.6.3. Wi-Fi MODULE
4.6.4. ETHERNET MODULE
4.6.5. RS-485 MODULE
5. TOPOLOGIES
5.1. SELECTING THE TOPOLOGY
5.2. 3 PHASE, 4 WIRE, STAR
5.3. 3 PHASE, 3 WIRE, DELTA
5.4. 3 PHASE, 4 WIRE, DELTA
5.5. 3 PHASE, 3 WIRE, DELTA, 2 CT (L1-L2)
5.6. 3 PHASE, 3 WIRE, DELTA, 2 CT (L1-L3)
5.7. 2 PHASE, 3 WIRE, DELTA, 2 CTs (L1-L2)
5.8. 2 PHASE, 3 WIRE, DELTA, 2 CTs (L1-L3)
5.9. 1 PHASE, 2 WIRE
6. FUNCTIONALITIES
6.1. CT LOCATION SELECTION
6.2. SYNCHRONIZATION FUNCTIONALITY
6.3. MAINS SYNCHRONIZATION FUNCTIONALITY
6.4. SINGLE GENSET PARALLEL WITH MAINS
6.5. DC GENSET FUNCTIONALITY
6.6. AMF FUNCTIONALITY
6.7. ATS FUNCTIONALITY
6.8. REMOTE START FUNCTIONALITY
6.9. ENGINE CONTROLLER FUNCTIONALITY
6.10. REMOTE DISPLAY UNIT FUNCTIONALITY
6.11. 400HZ OPERATION
7. CONNECTION DIAGRAMS
7.1. GENSET SYNCHRONIZATION FUNCTIONALITY
7.2. MAINS SYNCHRONIZATION FUNCTIONALITY
7.3. SINGLE GENSET PARALLEL WITH MAINS FUNCTIONALITY
7.4. DC GENSET FUNCTIONALITY
7.5. AMF FUNCTIONALITY
7.6. ATS FUNCTIONALITY
7.7. REMOTE START FUNCTIONALITY
7.8. ENGINE CONTROL FUNCTIONALITY
7.9. REMOTE DISPLAY PANEL FUNCTIONALITY
8. TERMINAL DESCRIPTION
9. TECHNICAL SPECIFICATIONS