Datakom DPR-400 User Manual

DPR-400 User Manual Rev_01 Firmware V-1.0
- 11 -
Mount the unit on a flat, vertical surface. Before mounting, remove the mounting brackets and connectors from
the unit, then pass the unit through the mounting opening.
Place and tighten mounting brackets.
Panel Cutout
Required Panel Depth
The unit is designed for panel mounting. The user
should not be able to access parts of the unit other
than the front panel during normal operation.

Datakom DPR-400 Specifications

General

Brand	Datakom
Model	DPR-400
Category	Relays
Language	English