DPR-400 User Manual Rev_01 Firmware V-1.0
- 27 -
Hold pressed for 1 second:
Manual control mode is activated. If manual control is password protected,
the password must be entered first
Move to previous display group.
Move to next display group. Removes alarms if an alarm is displayed on
screen.
Hold pressed for 1 second:
Reset all alarms.
Move to next screen within the group. Increase selected value in
Programming mode.
Hold pressed for 5 seconds:
The current screen is assigned as main opening screen.
Decrease selected value in Programming mode.
Hold pressed together for 5 seconds:
Enter Programming mode.
Return to previous menu discarding changes, cancel or exit.
Approve changes, set, or accept.
7.2. PUSHBUTTON FUNCTIONS
To Next Page
Loading...
