DPR-400 User Manual Rev_01 Firmware V-1.0
- 2 -
Any unauthorized use or copying of the contents or any part of this document is prohibited. This applies in
particular to trademarks, model denominations, part numbers and drawings.
This document describes the minimum requirements and necessary steps for the successful installation
of the DPR-400 family units.
Follow the advice given in the document carefully. These are often good practices for the installation of
the units which reduce future issues.
For all technical queries please contact Datakom at the e-mail address below:
technical.support@datakom.com.tr
If additional information to this manual is required, please contact the manufacturer directly at the e-mail
address below:
technical.support@datakom.com.tr
Please provide the following information in order to receive answers to any question:
- Device model name (see the back panel of the unit),
- Complete serial number (see the back panel of the unit),
- Firmware version (read from the display screen),
- Measuring-circuit voltage and power supply voltage,
- Precise description of the query.
To Next Page
Loading...
