Datalogic Compact 2D Reader Matrix-2000 - 8.4 CONFIGURATION

MATRIX-2000™ REFERENCE MANUAL
6
6.5 ETHERNET CONNECTION (MATRIX-21XX MODELS ONLY)
For Matrix-21XX models, the Ethernet connection is possible in two different layouts. In both
layouts, before proceeding with the connection, it is necessary to configure the reader
Ethernet parameters via VisiSet™. For further details, see the Ethernet Folder in the
VisiSet™ Help On Line.
In a Point-to-Point layout the reader is connected to a local host by using a cable with a
crossover adapter.
Crossover
A
dapte
r
CBX
Host
CAB-Sxx
PG 6000
3
2
 Ethernet Interface (with Crossover Adapter)
 Auxiliary Serial Interface (Local Echo) (RS232)
 External Trigger (for One Shot or Phase Mode)
1
Matrix-2000™
Figure 91 - Ethernet Point-to-Point Layout
62