Datalogic DS4800

RAPID CONFIGURATION
1
Alternative Layouts
• The ID-NET™ network is a built-in high-speed interface dedicated for high-speed
scanner interconnection. ID-NET™ is in addition to the Main and Auxiliary serial
interfaces.
If you need to install an ID-NET™ network refer to the DS4800 Reference Manual.
The scanner can also be configured by reading programming barcodes. See the ID-
NET™ Setup Procedure Using Programming Barcodes printable from the CD-ROM.
• If you need to install a Pass-Through network refer to the DS4800 Reference Manual.
• If you need to install a Multiplexer network refer to the DS4800 Reference Manual.
• If you need to install an RS232 Master/Slave (for backward compatibility) refer to the
DS4800 Reference Manual.
17