Datalogic GBT4100 - Error Codes

Error Codes
40 Gryphon™ I GBT4100
Error Codes
Upon startup, if the reader sounds a long tone, this means
the reader has not passed its automatic Selftest and has
entered FRU (Field Replaceable Unit) isolation mode. If the
reader is reset, the sequence will be repeated. The follow-
ing table describes the LED flashes/beep codes associ-
ated with an error found.
NUMBER
OF LED
FLASHES
/
BEEPS
ERROR
CORRECTIVE
ACTION
1 Configuration
Contact Helpdesk
for assistance
2 Interface PCB
4 Reader Module
5
Laser Pointer (if so
equipped)
6 Digital PCB
14 CPLD/Code Mismatch