Product Reference Guide 107
CODE SELECTION
The reader supports the following symbologies (barcode types). Symbology-dependent options
for each symbology are included in this chapter.
CODE EAN/UPC on page 109 STANDARD 2 OF 5 on page 178
• Coupon Control
INDUSTRIAL 2 OF 5 on page 184
• UPC-A • Code IATA
• UPC-E
DATALOGIC 2 OF 5 on page 191
• EAN 13 (Jan 13)
CODABAR on page 197
• ISSN • ABC Codabar
• EAN 8 (Jan 8)
CODE 11 on page 212
• UPC/EAN Global Settings
GS1 DATABAR™ OMNIDIRECTIONAL
on page 221
CODE 39 on page 136
• GS1 DataBar™ Omnidirectional
• Code 32 (ITAL Pharmaceutical Code) • GS1 DataBar™ Expanded
• Code 39 CIP (French Pharmaceutical) • GS1 DataBar™ Limited
CODE 128 on page 151 CODE 93 on page 229
• GS1-128
on page 237
CODE ISBT 128 on page 162 PLESSEY on page 243
CODABLOCK F on page 165 CODE 4 on page 251
INTERLEAVED 2 OF 5 (I 2 OF 5)
on page 169
CODE 5 on page 252
• Follett 2 of 5
• Interleaved 2 of 5 CIP HR
Default settings are indicated at each feature/option w
ith a green arrow. Also reference
Appendix B, Standard Defaults for a listing of the most widely used set of standard factory
settings. That section also provides spac
e to record any custom settings needed or implemented
for your system.
To set most features:
1. Scan the ENTER/EXIT PROGRAMMING barcode at the top of a
pplicable program-
ming pages.
2.
Scan the correct barcode to set the desired programming feature or parameter. You may
need to cove
r unused barcodes on the page, and possibly the facing page, to ensure that
the reader reads only the barcode you intend to scan.
MSI
To Next Page
Loading...
