Code 39 ENTER/EXIT PROGRAMMING MODE
138
Gryphon™ I GD4100/GM4100/GBT4100/L GD4300
Code 39 Start/Stop Character Transmission
Enable this option to enable/disable transmission of Code 39 start and stop characters
DEFAULT
Code 39 Start/Stop Character Transmission = Don’t Transmit
Code 39 Start/Stop Character Transmission = Transmit
.
Code 39 Full ASCII
Enables/disables the translation of Code 39 characters to Code 39 full-ASCII characters.
DEFAULT
Code 39 Full ASCII = Disable
Code 39 Full ASCII = Enable
To Next Page
Loading...
