Wireless Beeper Features ENTER/EXIT PROGRAMMING MODE
262
Gryphon™ I GD4100/GM4100/GBT4100/L GD4300
Base Station Beep
Enables/disables a beep indication when the handheld is placed in the Base Station.
BT Base Station Beep = Disable
BT Base Station Beep = Enable
DEFAULT
Leash Alarm
This setting specifies the number of seconds to sound the Leash Mode beeps (three per second)
when the handheld goes out of range. This is especially useful in instances where the reader
might inadvertently have been placed in a bag or cart.
For this mode to be effective, reader must be linked to the Base Station and Sleep Mode Timeout
on page 94 must be disabled. If the reader is asleep or disconnected from the Base Station, there
is no way for it to know where it is relative to the Base Station because communication is not
active between the devices.
Leash Alarm = Disabled
Leash Alarm = 1 Second
Leash Alarm = 2 Seconds
To Next Page
Loading...
