RS-232 Features
Product Reference Guide 6-123
RS-232 Team POS ICL Scale
Enables/disables the ability of the scanner to enter TEAM POS ICL Scale
mode.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code below which represents the desired setting for this
feature. You’ll need to cover any unused bar codes on this and the
facing page to ensure that the scanner reads only the bar code you
intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
RS-232 TEAM POS ICL SCALE MODE = DISABLE
RS-232 TEAM POS ICL SCALE MODE = ENABLE
To Next Page
Loading...
