Datalogic MAGELLAN 8400 - Single Cable RS-232 Scale - Transmit Weight Digits

Single Cable RS-232 Options
Product Reference Guide 6-141
Single Cable RS-232 Scale — Transmit Weight Digits
Specifies whether the scale transmits weight data as five digits or as four
digits.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code below representing the desired option. You’ll need
to cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
TRANSMIT WEIGHT DIGITS = FIVE DIGITS
TRANSMIT WEIGHT DIGITS = FOUR DIGITS