Datalogic MAGELLAN 8400 - Code 93 Correlation; Complete the Programming Sequence by Scanning the SWITCH Bar Code

Code 93 Enable
Product Reference Guide 6-349
Code 93 Correlation
This feature enables/disables character correlation for Code 93.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
Complete the programming sequence by scanning the SWITCH bar
code.
CODE 93 CORRELATION = DISABLE
CODE 93 CORRELATION = ENABLE