DataBar Omnidirectional Enable
Product Reference Guide 6-263
DataBar Omnidirectional/EAN-128 Emulation
Enables/disables the ability of DataBar Omnidirectional to be transmitted
as EAN-128.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
DataBar Omnidirectional/EAN-128 EMULATION = DISABLE
DataBar Omnidirectional/EAN-128 EMULATION = ENABLE
To Next Page
Loading...
