Other UPC/EAN Options
Product Reference Guide 6-251
2-Digit Add-ons Minimum Reads
Specifies the minimum number of times a 2-digit addon must be read
before it is marked as valid and then combined with a base label.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code representing the desired option below or on the
following pages. You’ll need to cover any unused bar codes on facing
pages to ensure that the scanner reads only the bar code you intend
to scan.
Complete the programming sequence by scanning the SWITCH bar
code.
2-DIGIT ADD-ONS MINIMUM READS = 1
2-DIGIT ADD-ONS MINIMUM READS = 2
To Next Page
Loading...
