Battery
User’s Manual 19
Battery Information
By default, the main battery pack is disconnected at the factory to
avoid damage due to excessive draining.
Rechargeable battery pack is less than half of full charge when
delivered. Before using the Memor 10, charge the battery pack as
indicated in Charge the Battery on page 15.
The battery pack autonomy varies according to many factors, such
as the frequency of barcode scanning, RF usage, battery life, storage,
environmental conditions, etc.
Close to the limits of the working temperature, some battery
performance degradation may occur.
The Memor 10 should be charged at an ambient temperature
between 0 - 35º C (32 to 122ºF) to achieve the maximum charging
rate.
Never charge the device battery in a closed space where excessive
heat can build up.
As a safety precaution, the battery may stop charging to avoid
overheating.
The Memor 10 gets warm during charging; this is normal and does
not mean a malfunction.
Even if the storage temperature range is wider, it is recommended
to store the terminal and the batteries at environmental
temperature, in order to achieve the longest battery life.
CAUTION
Do not incinerate, disassemble, short terminals, or
expose to high temperature. Risk of fire and explosion.
Use specified charger only. Risk of explosion if the
battery is replaced by an incorrect type. Dispose of
batteries as required by local authorities.
To Next Page
Loading...
