Parity
Product Reference Guide 49
Parity
This feature specifies parity required for sending and receiving data. A parity check
bit is the most significant bit of each ASCII coded character. Select the parity type
according to host device requirements.
• Select None when no parity bit is required.
• Select Odd parity and the parity bit value is set to 0 or 1, based on data, to ensure
that an odd number of 1 bits are contained in the coded character.
• Select Even parity and the parity bit value is set to 0 or 1, based on data, to ensure
that an even number of 1 bits are contained in the coded character.
ENTER/EXIT PROGRAMMING MODE
Parity = None
Parity = Even
Parity = Odd
DEFAULT
To Next Page
Loading...
