Datalogic PowerScan PM9500

Enter/Exit Programming Mode
244 PowerScan™ PD9530/PBT9500/PM9500
RS-485 Transmission Warning Message
Enable/Disable the ability of the cradle to transmit warning messages to the Host
regarding wrong reception of data.
DEFAULT
$CR4JH00\r
Not Transmitted
$CR4JH01\r
Transmitted
RS-485 Network Baud Rate
Specifies the baud rate of an RS-485 network.
DEFAULT
$CR4JE00\r
Baud Rate 9600
$CR4JE01\r
Baud Rate 19200
$CR4JE02\r
Baud Rate 34800