Global AIM ID Enter/Exit Programming Mode
Product Reference Guide
51
Global AIM ID
This feature enables/disables addition of AIM IDs for all sym-
bology types.
AIM label identifiers (as opposed to custom characters you select yourself as
with label identifiers) can be included with scanned bar code data. See
Table 3 on page 51 for a listing of AIM IDs.
AIM label identifiers consist of three characters as follows:
• A close brace character (ASCII ‘]’), followed by...
• A code character (see some samples in the table below), followed by...
• A modifier character (the modifier ch
aracter is symbol dependent).
DEFAULT
To Next Page
Loading...
