Datalogic PowerScan PM9500

Enter/Exit Programming ModeGlobal AIM ID
54 PowerScan™ PD9530/PBT9500/PM9500
Set AIM ID Individually for GS1-128
This feature configures a Label ID individually for the GS1-128 symbology
and the programming for this works the same way as Label ID. See
Label ID:
Set Individually Per Symbology, starting on page 275
for detailed instruc-
tions on setting this feature.
$CU8AI00(CR)
Set AIM ID Individually for GS1-128 = Disable
$CU8AI01(CR)
Set AIM ID Individually for GS1-128 = Enable
DEFAULT