94
SKORPIO™ X5
CONNECTIONS
USB CONNECTION
USB Direct Connection
You can use the provided USB Type A to Type-C cable to directly connect the Skorpio X5
to a host computer and transfer data through the USB interface.
Host Computer
Skorpio X5
USB Type A to Type-C Cable
1. Turn on the Skorpio X5.
2. Turn on the host computer.
3. Connect the device to the host PC via USB cable.
4. Scroll down the notification bar, tap the charging notification and change to Trans-
f
er files.
5. The device is now visible in your PC as a USB disk. You can start the data transfer.
NOTE: Connection through the cable complies to USB 3.1 stan
dard.
To Next Page
Loading...
