SETTINGS
USER’S MANUAL
59
Wi-Fi Roaming Settings
The roaming RSSI threshold is a CPS configurable parameter, that controls the signal
strength a radio needs to see before searching for another site.
The roaming RSSI difference controls the signal difference between the current access
point the device is c
onnected to and the target access point the device wants to roam
to. If the target AP signal is higher than the current by at least the value of this parame-
ter, the device will roam.
Use the Wi-Fi Roaming Settings to
configure the roaming RSSI threshold and the roam-
ing RSSI difference.
To Next Page
Loading...
