GETTING STARTED
32
SKORPIO™ X5
LED INDICATORS
The LEDs illuminate to indicate various functions or errors on the device. The following
table lists these indications. The good read LED indicator is programmable, and may or
may not be enabled ("
Scanner Settings" on page 40 for more details). The Charging LED is
configurable via SDK.
LED Status Description
Solid red The device is in pre-charge status.
Charging Status/
Android Notifica-
tions LED
Soli
d orange The device is charging.
Solid green Charging is complete.
Blinking red Charge fault.
Blinking blue (the
color
could change
depending on Android
settings)
Android notification.
Good Read Indicator
Solid red
Light is solid red from the time the user
pr
esses the scan key until the barcode
is decoded, until the scanner times out,
or until the user releases the scan key.
Solid green A good decode is completed.
Blinking green fading
to red through orange
Battery swap mode.
Battery Pack LEDs
The battery pack LEDs indicators notify the battery charge level, the battery health and
the power failures. To activate the LED indicators and display the battery status informa-
tion, remove the battery pack from the Skorpio X5 or from the 4 Slot Battery Charger
and press the lock
ing lever:
The label on the battery pack indicates the meaning of the LEDs color:
To Next Page
Loading...
