Datalogic Skorpio X5 - Scanner Options

SETTINGS
USER’S MANUAL 45
Scanner Options
Tap Scanner Options to customize the Skorpio X5 scanning behavior.
Enable Picklist
If enabled, it allows you to pick and decode a barcode from multiple barcodes printed
close together, when the scan illumination intersects more than one barcode. Only the
targeted barcode will be returned.
Enable Illumination
If enabled, it causes the scanner to turn on the illumination to aid decoding.
Enable Aim
Enables the laser aim.
Display Mode
Optimizes the reading of a barcode from a screen.
Target Mode
If enabled, when the scan button is pressed, the scanner will project an aiming pattern
to assist in centering over the barcode before scanning. Tap Target mode to select the
desired targeting behavior:
No Delay
Target mode is disabled.