Datalogic Skorpio X5 - Add a Wi-Fi Network

SETTINGS
64 SKORPIO™ X5
3. Select the network name you want to connect to from the available network list.
4. If the network is open, tap the profile and then tap Connect, or press and hold and
then select Connect.
If the network is secured, a dialog box appears requesting information relevant to
the networ
k security protocol (e.g., password, key, or certificate). Enter the
required information, then tap Connect:
Add a Wi-Fi Network
1. Tap Settings > Network & Internet and verify that the Wi-Fi is turned on.
2. Tap Wi-Fi.
3. Tap Add network at the end of
the available network list:
4. Enter the Network SSID (Wi-Fi network name). For secur
e Wi-Fi network connec-
tions, tap None under Securi
ty, and then select the type of security protocol
required from the pop-up menu. Enter any additional security information
required by the type of security protocol selected.
5. Tap Save.