CONNECTIONS
96
SKORPIO™ X5
ETHERNET CONNECTION
Use the 3 Slot Dock Wired to build a reading system for the collection, decoding and
transmission of barcoded data.
Ethernet Dock Connection
1. Connect the 3 Slot Dock to the power supply (available as optional accessory, p/n
91ACC0048).
2. Plug a Cat.5E or higher ethernet cable into the ethernet port on the back of the
dock.
3. Plug the ethernet cable into the ethernet hub or a port on the host device.
4. Turn on the Skorpio X5.
5. Enable ethernet communication (see "
Ethernet" on page 65).
6. Insert the Skorpio X5 into the dock.
Ethernet Hub
CAT-5E
Ethernet Cable
3-Slot Dock
Power Supply
(P/N 91ACC0048)
Skorpio X5
To Next Page
Loading...
