DATALOGIC APPLICATIONS
USER’S MANUAL
87
Vibrator
Enables the vibrator.
Auto-transparency
If enabled, the SoftSpot turns transparent automatically when it is not used.
Transparency Range
Sets the SoftSpot transparency level when it is used or when the auto-transparency fea-
ture is not enabled.
Speed of transparency
Sets the lapse of time it takes for the SoftSpot to turn transparent.
Actions
You can use SoftSpot to quickly switch between the applications you actively use.
Tap Configure actions >
> Application to add the applications you want to launch
with SoftSpot.
Only one action is active at a given moment. Tap the SoftSpot to launch the application.
You can switch between actions by swiping left and right on the SoftSpot.
To Next Page
Loading...
