BATTERY
10
SKORPIO™ X5
CHARGE THE BATTERY
The battery pack is not initially fully charged. After installing the battery, charge it with
the Datalogic USB Type-C wall adapter or with a dock.
During the charging process the charging LED positioned at the top left side of the dis-
play glows orange constantly. Once the charging process has been completed, the
charging
LED glows green constantly.
NOTE: The Skorpio X5 may get warm during ch
arging. This is normal and
does not mean a malfunction.
Charge with USB
Use the Skorpio X5 USB-type C wall adapter (available as an accessory, p/n 91ACC0048)
to charge the device from a power outlet.
You can also use the supplied Type-A/Type-C cable to charge the Skorpio X5 from any
self-powered USB hub or USB port on a computer.
To Next Page
Loading...
