SETTINGS
46
SKORPIO™ X5
Spot Timeout
Scanning takes place after a programmable time upon pressing the scan button. Tap
Target timeout to set the duration of the spot:
Release Scan
Scanning takes place after the scan button is released. Tap Release scan timeout to set
the scanning timeout after releasing the scan button:
Decode Timeout
Drag the Decode timeout slider to set the maximum amount of time the scanner
attempts to decode after target timeout (in case Spot Timeout is enabled) or after the
scan button is pressed (in case Target mode is disabled):
Enable Multi Scan
If selected, the scanner captures multiple labels sequentially.
Number of Required Labels
Drag the slider to indicate how many barcodes you want to collect.
Enable Single Notification
If selected, it enables indicators for each label, in order to get an intermediate notifica-
tion for each label decoded.
To Next Page
Loading...
