66 H-Class
Communications (continued)
Menu Item Details
MAX LENGTH COMMAND
Determines how a host Maximum Label Length
(<STX>M) command is handled, where:
ENABLED
Processes software commands normally.
DISABLED
Controls Maximum Label Length via menu settings;
see Section 4.2.1.
OPTION FEEDBACK
Allows feedback characters from an optional device to
be returned to the host device, in the format of
<A;B;C;D;E;F>[CR], where:
A - Is the device type: R = RFID; and, S = Linear Scanner
B - Is the resulting status: C = entire label complete; F =
faulted (failed) label; and, U = unknown
C - Is the number of expected reads for bar codes or tags,
given in two characters.
D - Is the number of good reads for bar codes or tags,
given in two characters.
E - Is the printer’s internal Job and Sub Job Identifier,
given in four characters each.
F - Is the data that was read, delimited with semicolons (;)
on multiple reads.
DISABLED
Reports no data.
SCANNER
Reports Linear Scanner data.
RFID HEX
Reports RFID data in hexadecimal format.
RFID ASCII
Reports RFID data in an ASCII format.
PROCESS SOH (DATA)
Determines the way the printer responds to an
Immediate Command (e.g., Get Status, Module
Storage, etc.), where:
DISABLED
Processes commands normally.
ENABLED
Interrupts operations upon SOH receipt to process the
command.
To Next Page
Loading...
Need help?
General