Datamax H-4212X User Manual

H-Class 65
Communications (continued)
Menu Item Details
HEAT COMMAND
Determines how host Heat commands are handled,
where:
ENABLED
Processes software commands normally.
DISABLED Controls Heat via the menu setting; see Section 4.2.2.
SPEED COMMANDS
Determines how host Print, Feed, Reverse, and Slew
commands are handled, where:
ENABLED
Processes software commands normally.
DISABLED
Controls speeds via the menu setting; see Section
4.2.2.
TOF SENSING COMMANDS
Determines how host Gap, Continuous, and Reflective
commands are handled, where:
ENABLED
Processes software commands normally.
DISABLED
Controls the Sensor Type via the menu setting; see
Section 4.2.2.
SYMBOL SET COMMAND
Determines how host Single and Double Symbol Set
commands are handled, where:
ENABLED
Processes software commands normally.
DISABLED
Controls Symbol Set selection via the menu setting;
see Section 4.2.4.
CNTRL-CODES (DATA)
Determines how host Control Codes are handled,
where:
ENABLED
Processes software commands normally.
DISABLED
Controls Control Codes via the menu setting; see
Section 4.2.4.
STX-V SW SETTINGS
Determines how a host option-enable command is
handled, where:
ENABLED
Processes the software command normally.
DISABLED
Controls <STX>V via menu settings; see Section
4.2.3.

Datamax H-4212X Specifications

General

Brand	Datamax
Model	H-4212X
Category	Printer
Language	English