Datamax Mark II User Manual

62 Appendix C – Ethernet Setup
9
Insert the
Accessories CD-
ROM and click
Browse.
10
Browse to the
\DRIVERS\
Seagull folder
on the CD-ROM.
Ensure the file
“Datamax for
95, 98, ME,
2000, and xp.inf
is selected”
then click OK.
11
Click OK.
12
Choose your
printer from the
list and then
click Next>.
13
Assign a name
in the Printer
name field and
select whether
or not it is to be
your default
printer then
click Next>.
14
Select whether
or not to share
this printer on
your network.
Then click
Next>.
15
Select No then
Click Next>.
16
Confirm your
settings and
then click
Finish.
17
If prompted
with the Digital
Signature Not
Found window,
click Yes to
continue
installation.
18
Your computer
will now copy
the necessary
files from the
CD-ROM.
The driver and port installation is now complete. The printer can be selected through any Windows application.

Datamax Mark II Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Resolution	203 dpi
Max Print Speed	6 ips (152 mm/s)
Connectivity	USB, Serial, Parallel, Ethernet
Media Sensor	Reflective/Transmissive
Processor	32 bit RISC processor
Media Types	Labels, Tags, Tickets
Media Thickness	0.002 to 0.010 inches
Power Source	100-240V AC, 47-63 Hz
Ribbon Width	1.0 to 4.25 inches