PROGRAMMER’S REFERENCE MANUAL
Label layout definition commands
Page 21
121
122
123
124
MaxiCode mode 2
MaxiCode mode 3
MaxiCode mode 4
MaxiCode mode 5
Matrix code developed by UPS (United Parcel Service)
which can encode about 100 characters of data in an area
of 28x27 mm. Modes 2 and 3 are optimized for encoding
postal address information. Mode 4 is used for encoding
arbitrary data. Mode 5 employs enhanced error correction.
131 Data matrix Matrix code. Arbitrary binary data. A maximum of 3116
numeric, 2335 alphanumeric characters or 1556 bytes
binary data can be coded.
Table 2 – 2D code symbologies in Labelpoint
To Next Page
Loading...
