Datamax W-6208 - Appendix C Module Assignments; Print Resolutions and Maximum Label Widths

W-Class 101
$SSHQGL[&
For details concerning information in this section consult the I & W Class
Programmer’s Manual.
Module Assignments
Memory Module
Designator Module Size Volatile* Location / Use
A Future Option N/A N/A
B Future Option N/A N/A
D
1024 KB
(default size)
Yes Main PCB SDRAM – user addressable
for graphics, fonts, and label formats
F 4 MB No Optional Flash Card – user addressable
for graphics, fonts, and label formats
G 256 KB No Main PCB Flash – user addressable for
graphics, fonts, and label formats.
Y 64 KB No Main PCB Flash – reserved for EFIGS
Z 4 MB No Optional Flash Card – reserved for
ILPC
*When power is removed from the printer, stored data will be lost.
Print Resolutions and Maximum Label Widths
Printhead Resolutions and Widths
Maximum Print Width
Model
Printhead
Resolution
Inches Millimeters
Factory Default
Setting
W-6208 203 dots/inch
(8 dots/mm)
6.61 167.89 6.62
W-6308 300 dots/inch
(11.8 dots/mm)
6.40 162.56 6.40
W-8306 300 dots/inch
(11.8 dots/mm)
8.52 216.28 8.53