4W-Class
LAN Interface
A slide-in circuit card assembly that provides network connectivity, allowing
multiple users on various platforms to share the same printer.
Peel and Present Mechanism (requires the Internal Rewind option)
A device used to automatically separate printed labels from the backing
material. When accompanied by the present sensor option, on-demand label
dispensing becomes possible.
Present Sensor
A sensor used to control the printer output. When enabled, printing occurs after
the removal of a previously print label.
RS-422 Serial Interface
A single-drop interface to support greater distances from the host at
communication rates of up to 38,400 baud.
Twinax/Coax Interface (including cable)
These are internal devices, providing connection to AS/400 and System/3X
Twinax host system or 3270-type host system.
1.1 Option Installation
This table lists the recommended qualification level for the person installing the
options. Contact your dealer or Datamax Technical Support for details.
Suggested Experience Level
Option Qualified Installer
Cover Dampener DMX Certified Technician
Cutter Tray Operator
Cutters: Standard and Light-Duty DMX Certified Technician
DMX Passport External Keyboard Operator
Font Expansion Card DMX Certified Technician
Internal Rewind DMX Certified Technician
International Language Programming Capability DMX Certified Technician
I/O Expansion Card DMX Certified Technician
LAN Interface DMX Certified Technician
Peel Mechanism Operator
Present Sensor DMX Certified Technician
RS-422 Serial Interface DMX Certified Technician
Twinax/Coax Interface DMX Certified Technician
To Next Page